Den gesamten Sender durchsuchen
The UL489 NDM3EU-225 is an electronic molded-case circuit breaker developed for North American low-voltage distribution systems. It combines overload long-delay, short-circuit short-delay and instantaneous protection in a compact frame.
| Rated Insulation Voltage | 800 V |
|---|---|
| Nennspannung | AC 240 / 480 V |
| Frame Current | Up to 225 A |
| Interrupting Capacity | 65 kA at AC 240 V; 35 kA at AC 480 V |
| Mechanical / Electrical Life | 4,000 / 4,000 operations |
| Certifications | UL 489, UL 486E, UL 1998 |
Nur typische Konfiguration. Die endgültigen Nennleistungen werden anhand der Projektanforderungen bestätigt.
Suitable for industrial switchboards, distribution panels and commercial power systems requiring electronic protection and UL-certified equipment.
Applications: NDG2-200/3 Switch Disconnector is applicable to the low-voltage distribution or motor network under AC 50Hz, rated working voltage of AC400V and AC690V and rated working current of 200A for disconnection of infrequent co...
Details anzeigen
1.Applicable Scope and Purpose The NDQ3-250 P-grade ATSE are applicable for sites with the AC voltage below AC380V.AC400V.AC415V and the rated frequency of 50Hz. This product complies with the GB14048.1-2012 and GB/T14048.11-2016 standards in acco...
Details anzeigen
NDB1LE-100 is a compact residual-current circuit breaker for low-voltage terminal distribution. It combines overload, short-circuit, earth-leakage and isolation protection in one DIN-rail device. Typical configuration only. Final ratings are conf...
Details anzeigen
NDB3-30 is a compact hydraulic-magnetic circuit breaker for equipment, covering low-current AC and DC circuits. It provides overload and short-circuit protection with configurable delay curves and actuator options. Typical configuration only. Fin...
Details anzeigen
Ausgewählte Kategorien
Produktanfrage senden
Wir werden uns innerhalb von 24 Stunden bei Ihnen melden.