NDM3A-630 Kompaktleistungsschalter

2023年11月27日Niederspannungsprodukt Produkt im Bereich neue Energien Photovoltaikprodukt 9940

Verfügbare Zertifizierungen CE Die Verfügbarkeit hängt vom Modell und der Konfiguration ab.

NDM3A-630 Molded Case Circuit Breaker（images 1）

The NDM3A-630 molded case circuit breaker (hereinafter referred to as circuit breaker) appliesto infrequent switching of circuits with the AC 50/60Hz, the working voltage of AC1000V and working current of 630A as well as infrequent motor starting. With the overload, short circuit and undervoltage protection functions, the circuit breaker can protect lines and power equipment from damage.

Technical Parameters

Model			NDM3A-630
Rated current of frame Inm(A)			630
Rated current In(A)			400,500,630
Rated insulation voltage Ui(AC V)			1140
Rated impulse withstand voltage Uimp (V)			8000
Rated working voltage Ue (AC V)			550,600,690,800,1000
Power frequency withstand voltage U(1min)(V)			3500
Utilization category			A
Number of poles			3
Breaking capacity level			M
Rated limit short-circuit breaking capacity Icu (kA)	AC550V		50
	AC600V		42
	AC690V		35
	AC800V		30
	AC1000V		12
Rated operating short-circuit breaking capacity Ics (kA)	AC550V		50
	AC600V		42
	AC690V		35
	AC800V		23
	AC1000V		12
Operating performance (times)	Electrical life	AC550V	4000
		AC600V	2500
		AC690V	2000
		AC800V	1500
		AC1000V	1000
	Mechanical Life	Maintainable Free Life	10000
		Maintainable Life	20000

Normal Working Environment
1)The altitude of the installation site doesn’t exceed 2,500m. See the “High-altitude DeratingFactor Table of Circuit Breaker” for the derating factor at the altitude;
2)The ambient temperature is -35℃ ~ + 70℃; the average within 24 h shall not be morethan +35℃. If the ambient temperature is higher than +40℃, the user needs to reduce thecapacity. See the “Derating Factor Table of Temperature Change for the Circuit Breaker”for the derating factor;
3)Its relative humidity at an ambient temperature of +40℃ should not exceed 50%. A higherrelative humidity is allowed at a lower temperature. For example, the relative humidity at20℃ can reach 90%; for frost due to temperature change, the corresponding measuresshould be taken;
4)The product can withstand the effects of wet air, salt mist, oil mist and mould;
5)The installation category of the circuit breaker connected to the main loop is: Category Ⅲ (power distribution and control level), The installation category of the circuit breaker notconnected to the main loop is: Category Ⅱ (load level);
6)The pollution level is Level 3;
7)The product should be installed in places that are free from explosive media, mediacorrosive to metal, insulation damaging gas, and conductive dust, which should be alsoavoided from snow and rain;
8)In case of stricter user conditions than the above description, negotiate with themanufacturer.